Installation notes Edit
1. The direction of liquid flow should be consistent with the arrow direction indicating the direction of flow on the shell of the sensor, and the upstream straight pipe segment should be ≥20dn, and the downstream straight pipe segment should be ≥5dn (dn is the inner diameter of the pipe).
2. The sensor should be far away from the external magnetic field, if it cannot be avoided, necessary measures should be taken;
3, in order not to affect the normal transmission of liquid maintenance, the bypass pipe should be installed outside the straight pipe section at both ends of the sensor;
4. When the sensor is installed in the open air, please do a good job of waterproof treatment of the amplifier plug;
5. The wiring of sensor and display instrument should be selected according to the power supply of the amplifier
1. The direction of liquid flow should be consistent with the arrow direction indicating the direction of flow on the shell of the sensor, and the upstream straight pipe segment should be ≥20dn, and the downstream straight pipe segment should be ≥5dn (dn is the inner diameter of the pipe).
2. The sensor should be far away from the external magnetic field, if it cannot be avoided, necessary measures should be taken;
3, in order not to affect the normal transmission of liquid maintenance, the bypass pipe should be installed outside the straight pipe section at both ends of the sensor;
4. When the sensor is installed in the open air, please do a good job of waterproof treatment of the amplifier plug;
5, sensor and display instrument wiring, should be based on the amplifier power supply to choose the wiring mode
